How to use a remote starter on a manual transmission

 · Compustar remote starters simulate the clutch pedal to remotely start the engine. When installing a Compustar remote starter on a manual-transmission vehicle, an additional clutch bypass connection is required. This connection simulates the electronic signal produced by the clutch pedal, normally a ground signal sent to the vehicle’s ignition system. I show you a trick to safely integrate your ebrake in to the starter's wiring to never allow the car to start unless it is engaged. Safety first!Remote start. In addition, the manual transmission remote start is also available in a car alarm remote start combo package. The manual transmission remote start is set up to prevent unwanted or accidental starting with the transmission in gear. Therefor it is designed as a fail safe system. In fact you should come by and we’ll show you how they work.

Hybrid Remote Starters have both an automatic transmission and manual transmission mode. It is the responsibility of the vehicle's operator to ensure that: (a) when the remote starter is in use with a vehicle equipped with a manual transmission, the transmission remains in the NEUTRAL POSITION ONLY. (b) when the remote starter is in use with. Absolutely! Compustar systems are compatible with many manual transmission or standard vehicles. Any remotes from our Pro or Prime series paired up with a Compustar remote start control module will work. However, the LT series products will not function on a manual transmission vehicle. I just purchased a new tacoma TRD Sport with 6M transmission. I will hopefully take delivery this week. I am hoping to have a remote start system installed. Does anyone have a remote starter with the manual transmission? I would prefer a plug play installation. Thanks.

Just pre-set your vehicle's heat or AC controls and the system will turn on the vehicle's heat or AC shortly after the remote starter is activated. Multiple Remote Start Run Time Options: The system's remote start run time can easily be changed to run the vehicle for 5, 10, 15, 20, 45 or 60 minutes. Choice provided during checkout. Here Is How The Manual Transmission Remote Start Sequence Works. When you arrive at your destination, you simply pull into your parking spot. While the vehicle is still running, you engage the parking brake with your foot still on the brake pedal. All you have to do is wait 3 to 4 seconds before turning off the ignition. Put the car in neutral then set the ebrake, you year a click then pull the key out with the car still running. Now get out and once the last door closes it will lock then shut off. You are now in reserve mode and set to remote start. The car will not remote start unless that sequence is done.